Skip to main content

Axial fans

Plastic axial fans – flexible in the tightest of spaces

The HLU axial fans are the solution for tight installation spaces and ideal for applications with large air volumes at low pressures. They offer compact installation dimensions with high volume flows and can be installed in any position on the suction and pressure sides of the piping system. In order to protect the internal motor from contaminated conveying media, it is separated from the exhaust air flow. For use in potentially explosive areas, all axial fans are optionally available in explosion-proof versions in accordance with ATEX for Zone 2

HF A

Medical and hygiene sector – Electroplating industry – Composting – Science and Research – Laboratory equipment – Food industry – Chemical and pharmaceutical industry

HF A

Application

  • Can be used in all applications with large air volumes at low pressures
  • ideal for bottle cleaning systems in the beverage industry, laboratory exhaust air and all applications with short pipes
  • optionally suitable for installation and extraction from ATEX Zone 2

characteristics

  • Volume flow from 200 – 50,000 m³/h
  • at a maximum pressure difference of 500 Pa
  • Available in 8 nominal widths from 200 – 1,000 mm
Volume flow 200 – 50,000 m³/h
maximum pressure difference 500 Pa
Efficiency up to 77%
Nominal diameters 8 nominal diameters from 200 – 1000 mm
operating temperatur 0 – 40 °C
Housing material PP, PVC
Impeller material PPs
drive Direct drive
Atex optionally suitable for installation and extraction from ATEX Zone 2
execution Adjustable blades can be adjusted in the range of 20° – 60° in 5° increments
Connection options Flange connection

Advantages:

corrosion-resistant
compact design
Fast availability of standard variants
Suction and pressure sides with the same diameters
Engine outside the airflow
Use of different motors (Ex motors from size 250) possible

VIEW CATALOGUE

AX58

AX58

Application

  • Can be used in all applications with small to large air volumes, with low pressure losses
  • with optional accessories also suitable for more demanding industrial applications, such as the extraction of baths in the electroplating industry
  • optionally suitable for installation and extraction from ATEX Zone 2

characteristics

  • Volume flow from 500 – 50,000 m³/h
  • at a maximum pressure difference of 900 Pa
  • Available in 13 nominal widths from 200 – 1,000 mm
Volume flow 500 – 50,000 m³/h
maximum pressure difference 900 Pa
Efficiency up to 83%
Nominal diameters 13 nominal diameters from 200 – 1000 mm
operating temperatur 0 – 60 °C
Housing material PP, PPs, PVC, PE
Impeller material PP, PPs, PVC, steel-coated
drive Direct drive
Atex optionally suitable for installation and extraction from ATEX Zone 2
Connection options Flange connection

Advantages:

  • corrosion-resistant
  • energy efficient
  • Engine outside the airflow
  • Use of different motors (Ex-motors) possible
VIEW CATALOGUE